HP Integrated Lights-Out 3 User Manual
Page 91
Advertising
Figure 42 iLO RBSU Configure iLO Command-Line Interface window
6.
For each option that you want to change, select the option, and press the spacebar to toggle
through the available settings. You can change the following settings:
•
Serial CLI Status
•
Serial CLI Speed (bits/second)
For more information about these options, see
.
7.
Press F10 to save the settings.
8.
Select File
→Exit to close iLO RBSU.
Using the iLO RBSU
91
Advertising