HP Integrated Lights-Out 3 - Manual (Page 127)

Figure 70 Configuring the BIOS Serial Console Baud Rate
NOTE: The current implementation of the iLO Virtual Serial Port does not use a physical
UART, so the BIOS Serial Console Baud Rate value will have no effect on the actual speed the
iLO Virtual Serial Port will use to send and receive data from the system.
14. Select EMS Console, and then press Enter.
15. Select the COM port that matches the value selected in
step 7 , and then press Enter, as shown
in Figure 71 (page 128) .
Using the text-based Remote Console 127