HP Integrated Lights-Out 3 User Manual
Page 212
Table 11 Event log entries (continued)
Description
Event log entry
A user powered off the host server.
Host server powered OFF by:
<User>
A user powered on a host server.
Host server powered ON by:
<User>
A user began using a virtual floppy.
Virtual Floppy in use by:
<User>
A user logged in to a Remote Console session.
Remote Console login: <User>
A Remote Console session was closed.
Remote Console Closed
A console login failed with the specified login and IP address.
Failed Console login - IP
Address: <IP address>
A local user was added.
Added User: <User>
A local user was deleted.
User Deleted by: <User>
A local user was modified.
Modified User: <User>
A valid user logged in to iLO by using an Internet browser.
Browser login: <User>
A valid user logged out of iLO by using an Internet browser.
Browser logout: <User>
An authorized user logged in by using the Remote Console port.
Remote Console login: <User>
An authorized Remote Console user was logged out or the Remote Console
port was closed after a failed login attempt.
Remote Console Closed
An unauthorized user failed three login attempts when using the Remote Console
port.
Failed Console login ? IP
Address: <IP address>
A new entry was made to the authorized user list.
Added User: <User>
An entry was removed from the authorized user list. The User section displays
the user who requested the removal.
User Deleted by: <User>
The power was reset.
Power Cycle (Reset): <User>
The system was booted with the Security Override Switch set to On.
Security Override Switch
Setting is On
The system was booted with the Security Override Switch changed from On to
Off.
Security Override Switch
Setting Changed to Off
The on-board clock was set. Displays the previous time or NOT SET if no time
was set.
On-board clock set; was
previously [NOT SET]
The logs are full and the SNMP trap alert failed for a specified IP address.
Logs full SNMP trap alert
failed for: <IP address>
Security was disabled and the SNMP trap alert failed for a specified IP address.
Security disabled SNMP trap
alert failed for: <IP
address>
Security was enabled and the SNMP trap alert failed for a specified IP address.
Security enabled SNMP trap
alert failed for: <IP
address>
An authorized user connected the virtual floppy.
Virtual Floppy connected by
<User>
An authorized user disconnected the virtual floppy.
Virtual Floppy disconnected
by <User>
An authorized user added a license.
License added by: <User>
212
Troubleshooting