HP Integrated Lights-Out 3 - Manual (Page 147)

Figure 78 Power Meter page
The power-meter graphs display recent server power usage. The graph data is reset when iLO or
the server is reset. The iLO firmware periodically samples peak power, average power, and power
cap. The following graphs are displayed:
•
24-Hour History Graph—This graph displays the power usage of the server over the previous
24 hours. The iLO firmware collects power usage information from the server every 5 minutes.
The bar graph displays the average values in blue and the peak values in red. The graph
shows No cap set during a host power reset.
•
20-Minute History Graph—This graph displays the power usage of the server over the previous
20 minutes. The iLO firmware collects power usage information from the server every 10
seconds. The bar graph displays the average values in blue and the peak values in red.
TIP: Move the mouse cursor over the graph to view the power usage for a specific point in time.
When you are viewing the power-meter graphs, use the Display Options to control the information
that is displayed. You can view minimum, average, peak, and cap power information.
Using iLO Power Management 147