HP Integrated Lights-Out 3 - Manual (Page 90)

Figure 41 Global iLO 3 Settings window
5. For each option that you want to change, select the option, and press the spacebar to toggle
the setting to ENABLED or DISABLED. You can change the following settings:
•
iLO 3 ROM-Based Setup Utility
•
Require iLO 3 RBSU Login
•
iLO 3 ROM-Based Setup Utility
•
Local Users
For more information about the first four options in the list, see Table 2 (page 41) .
For more information about the last option in the list, see “Configuring authentication and
directory server settings” (page 52) .
6. Press F10 to save the settings.
7. Select File
→Exit to close iLO RBSU.
Configuring serial CLI options by using iLO RBSU
1. Optional: If you access the server remotely, start an iLO remote console session.
You can use the .NET IRC or Java IRC.
2. Restart or power on the server.
3. Press F8 in the HP ProLiant POST screen.
4. Select Settings
→CLI, and then press Enter.
5. The Configure iLO Command-Line Interface menu opens, as shown in Figure 42 (page 91) .
90 Configuring iLO