HP Integrated Lights-Out 3 - Manual (Page 30)

Figure 10 Login page Language menu
•
From the toolbar located on the bottom right side of the iLO web interface, as shown in
Figure 11 (page 30) .
Figure 11 Toolbar Language menu
•
From the Administration
→Access Settings→Language page. For instructions, see
“Configuring
the current language settings” (page 30) .
Configuring the default language settings
To set the default language for the users of this instance of the iLO firmware:
1.
Navigate to the Administration
→Access Settings→Language page, as shown in
Figure 9
(page 29) .
2. Select a value in the Default Language menu.
The available languages are English and any other language for which a language pack is
installed.
3. Click Apply.
Configuring the current language settings
To set the current language of this browser session:
1.
Navigate to the Administration
→Access Settings→Language page, as shown in
Figure 9
(page 29) .
2. Select a value in the Current Language menu.
The available languages are English and any other language for which a language pack is
installed.
3. Click Apply.
Uninstalling a language pack
1. Navigate to the Administration
→Access Settings→Language page, as shown in
Figure 9
(page 29) .
2. Click the Uninstall button in the Installed Languages section.
The following message appears:
Applying new settings requires an iLO reset.
Would you like to apply the new settings and reset iLO now?
30 Configuring iLO