HP Integrated Lights-Out 3 - Manual (Page 202)

Naming management processors
The Name the management processors window ( Figure 113 ) enables you to name iLO management
device objects in the directory and create corresponding device objects for all management
processors to be managed. You can create names by using one or more of the following:
•
The network address
•
The DNS name
•
An index
•
Manual creation of the name
•
The addition of a prefix to all
•
The addition of a suffix to all
To name the management processors, click the Object Name column and enter the name, or do
the following:
1.
Select Use iLO Names, Create Name Using Index, or Use Network Address.
2. Optional: Enter the text to add (suffix or prefix) to all names.
3. Click Create Names.
The names appear in the Object Name column as they are generated. At this point, names
are not written to the directory or the management processors. The names are stored until the
next HP Directories Support for ProLiant Management Processors window is displayed.
4. Optional: To change the names, click Clear Names, and rename the management processors.
5. When the names are correct, click Next.
Figure 113 Name the management processors window
Configuring directories when HP extended schema is selected
The Configure Directory window ( Figure 114 ) enables you to create a device object for each
discovered management processor and to associate the new device object with a previously defined
202 Directory services