HP StorageWorks 1000i Virtual Library System - Manual (Page 19)

2 Setting up the VLS1000i
hardware
The hardware installation consists of these steps:
• Preparing for the installation
• Unpacking
• Racking (optional)
• Installing cables
Preparing for the installation
The following sections describe preparing for the installation.
Tools for installation
The following tools are required for the installation.
• Phillips screwdriver
• Box cutting knife
Taking ESD precautions
To prevent damaging the system, be aware of the precautions you need to follow when setting up the
system or handling parts. A discharge of static electricity from a finger or other conductor may damage
system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of
the device.
To prevent electrostatic damage:
• Avoid hand contact by transporting and storing products in static-safe containers.
• Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.
• Place parts on a grounded surface before removing them from their containers.
• Avoid touching pins, leads, or circuitry.
• Always be properly grounded when touching a static-sensitive component or assembly.
Selecting a location
When selecting a location, follow these guidelines:
• Select a location that is flat, sturdy, and level.
• Select a location close to a network Ethernet port and an AC outlet. The AC power cord is the
appliancet’s main AC disconnect device and must be easily accessible at all times.
• Ensure minimum clearance of 15.4 cm (6 inches) at the back of the appliance, 30.8 cm (12
inches) at the front of the appliance, and 5.08 cm (2 inches) on either side of the appliance.
• Avoid placing the autoloader on the floor or other carpeted surfaces.
• The appliance makes some noise when operating, so choose a location where the noise will
not be cause a disturbance.
• Avoid areas near frequently used doors and walkways, stacks of supplies that collect dust,
printers, and smoke-filled rooms.
HP StorageWorks 1000i Virtual Library System 19