HP StorageWorks 1000i Virtual Library System - Manual (Page 79)

1 2
11
3 4 8 10 6
5 7 9
10699
1 Slim DVD-ROM 7 UID LED
2 Slot power LED 8 Power LED
3 Two USB ports 9 UID button
4 HDD activity LED 10 Power button
5 LED (not used) 11 HDD bays (0–3)
6 NICs LEDs
Figure 60 Front panel LEDs and buttons
When you have a problem with one of your drives, diagnose the problem as follows:
1. Attach a keyboard and monitor to the appliance.
2. Insert the HP StorageWorks VLS Diagnostic/Quick Restore CD into the CD-ROM drive on the
VLS1000i array.
3. Reboot the array and wait for the system to prompt you.
NOTE:
If the diagnostics or disaster recovery process stops and a c:> prompt displays, or to refresh the
status of the disaster recovery process, type diag, then press Enter.
4. Follow the instructions that display on the monitor.
NOTE:
The Diagnostic/Quick Restore CD will warn you of data loss only when data loss can or will occur;
otherwise, no mention of data loss displays.
Possible error messages and their meanings or corrective actions are as follows:
HP StorageWorks 1000i Virtual Library System 79