A specifications, Vls1000i node specifications, System specifications – HP StorageWorks 1000i Virtual Library System User Manual
Page 97: Electrical specifications, A specifications

A Specifications
This section provides the VLS node specifications.
VLS1000i node specifications
Table 7 VLS1000i node specifications
Attribute
VLS1000i
Disk drive capacity
500 GB SATA 7200 rpm
Number of drives
4
Usable capacity
1.5 GB
Aggregate sustainable data transfer 40 MB/sec
Interface
1x1 GB iSCSI port
System specifications
Table 8 System specifications
Attribute
Specification
Processor
Pentium dual-core Smithfield processor (2.8 GHz,
800 MHz FSB)
Memory
1024 MB DDR2 SRAM 533 MHz FSB
RAID controller
Hardware
Factory configured RAID
RAID 5
LAN
Dual 10/100/1000 Ethernet auto-sensing LAN
interface
NOTE:
The second LAN is currently not used.
Electrical specifications
Table 9 Electrical specifications
Attribute
Specification
Nominal line voltage
115/230 VAC
Range line voltage
90/264 VAC
Rated input frequency
47 to 63 Hz
Rated input current
6 A (115 VAC), 3 A (230 VAC)
Power supply output
350 W (rated steady state power output)
HP StorageWorks 1000i Virtual Library System
97