System fans, 74 unlock retaining clips, 75 inserting dimm into socket – HP StorageWorks 1000i Virtual Library System User Manual
Page 91: 76 location of system fans
Advertising
Figure 74 Unlock retaining clips
2.
Carefully insert the DIMM into the socket until the retaining clips snap back in place.
Figure 75 Inserting DIMM into socket
3.
Reattach the rear top cover (see
).
System fans
CAUTION:
Remove power to the server by disconnecting the power cord before removing or installing a system fan.
Refer to
for the location of the system fans.
Figure 76 Location of system fans
To remove a system fan:
1.
Remove the rear top cover (see
2.
Locate the cable for the fan to be removed and unplug it from the backplane connector.
HP StorageWorks 1000i Virtual Library System
91
Advertising