Unpacking – HP StorageWorks 1000i Virtual Library System User Manual
Page 20
CAUTION:
Excessive dust and debris can damage tapes and tape drives.
Do not place the autoloader on See
for more information.
If you will rack the appliance, see
Optimum environment for a racked system (optional)
Unpacking
Place the shipping carton as close to the installation site as possible. Before unpacking the VLS, inspect
the shipping carton for damage that may have occurred during shipment. If you detect any damage,
notify the carrier and HP before unpacking the unit.
To unpack the VLS:
1.
Open the top of the shipping cartons.
2.
Carefully lift the units out of the boxes and remove the packing materials.
3.
Place the units on a stable work surface.
NOTE:
Inspect the units for any damage that may have occurred during shipment. If damage is detected,
contact your authorized service representative.
4.
Locate the materials and documentation necessary for installing the VLS (see
). All the
rack mounting hardware and documentation necessary for installing a VLS node into a rack is
included in the node shipping carton.
20
Setting up the VLS1000i hardware