HP StorageWorks 1000i Virtual Library System - Manual (Page 36)

Recording the network configuration
As you complete the configuration process by following the steps, use the following form to note the
information you enter.
IMPORTANT:
This information will be useful if you have to re-configure the VLS for any reason.
Table 2 Network configuration
NIC Port 1 E-mail notification
IP address: SMTP server IP address:
Subnet mask: From address:
Default gateway: Address for all:
Address for critical:
Configuring the VLS appliance with the VLS Discovery tool
Use the VLS discovery utility to set the network settings on an unconfigured VLS, and to view the network
settings of configured devices. The VLS discovery utility looks for all the devices on the same subnet as
the Windows computer on which it is running. It then lists the devices and indicates whether they are
configured (have an IP address) or are unconfigured.
To set the network settings using the VLS discovery utility:
1. Insert the VLS Documentation CD into the CD drive on a Windows system that is on the same
subnet as the VLS.
The CD auto-launches.
2. Click VLS discovery utility.
The Scanning for Devices window displays (see
Figure 19 ).
Figure 19 Scanning for devices
The VLS discovery utility opens and lists all the devices it sees on the subnet ( Figure 20 ).
The Configured box for a device is checked if the device has an IP address.
The device type, host name, IP address (if available), and serial number are displayed for each
device listed.
36 Configuring the VLS1000i