HP StorageWorks 1000i Virtual Library System - Manual (Page 59)

Relocating an appliance
IMPORTANT:
To ensure preservation of data on the VLS, do not turn off the appliance using the power button; instead,
use the Shut Down option in the VLS GUI.
NOTE:
The following process presents associating devices and backup hosts using the Microsoft iSCSI Software
Initiator. The steps and screens may be different depending on the iSCSI solution on your system.
To shut down, move, then restore power to an appliance:
1. Make sure that none of the initiators (hosts) have active connections with the VLS.
For example, in the iSCSI Initiator Properties dialog box for the Microsoft initiator, you can check the
Targets tab to determine if there are any connections that may need to be terminated.
Figure 48 Connected targets
2. If any of the targets in Figure 48 have the status Connected, there is a possibility that there is
an active session. To find out if there are any active sessions, click on one of the targets that
is connected and then click Details.
HP StorageWorks 1000i Virtual Library System 59