HP StorageWorks 1000i Virtual Library System - Manual (Page 35)

Figure 17 Web features settings
7. If you made any changes, click OK to save them.
Powering on the VLS
To power up the VLS appliance:
1. Plug the node AC power cord into a power source if not already connected.
2. Press the Power button (see Figure 18 ).
The fan will initially be loud, but will become quieter.
3. Wait for the system to beep twice. This indicates the appliance is online.
10986
Figure 18 Press power button
Configuring the VLS
The images shown in the following sections were captured on a Windows system using the Internet
Explorer browser. The screens might appear slightly different if you are using a different browser or
a UNIX-based system.
HP StorageWorks 1000i Virtual Library System 35