Front top cover, 62 sliding on rear top cover, 63 tighten rear top cover screw – HP StorageWorks 1000i Virtual Library System User Manual
Page 85
Advertising
Figure 62 Sliding on rear top cover
2.
Secure the cover with one screw.
Figure 63 Tighten rear top cover screw
Front top cover
NOTE:
The rear top cover must be removed before the front top cover can be removed. See
CAUTION:
Remove power to the server by disconnecting the power cord before removing or installing the chassis
top covers.
To remove the front top cover:
1.
Loosen the four screws along the top edge and the two screws on both sides of the cover.
HP StorageWorks 1000i Virtual Library System
85
Advertising