72 dimm map, 73 removing a dimm, Populating the dimm sockets – HP StorageWorks 1000i Virtual Library System User Manual
Page 90
Advertising
Figure 72 DIMM map
Table 6 Populating the DIMM sockets
DIMM
quantity
CH_A
DIMM0
CH_A
DIMM1
CH_B DIMM0 CH_B DIMM0
1
None
None
None
Yes
None
Yes
None
None
2
None
Yes
None
Yes
4
Yes
Yes
Yes
Yes
To remove a DIMM from a socket:
1.
Remove the rear top cover (see
2.
Press the retaining clips outward to unlock the DIMM socket (1). This action releases the module
and partially lifts the module out of the socket.
Figure 73 Removing a DIMM
3.
Lift out the DIMM (2).
To install a DIMM into a socket:
1.
Unlock a DIMM socket by pressing the retaining clips outward.
90
Component replacement
Advertising