HP StorageWorks 1000i Virtual Library System - Manual (Page 53)

4 Working with the VLS1000i
This chapter provides a few tips on working with the VLS including:
• Logging on from any system with network access
• Understanding the summary pages
• Understanding how dynamic tape devices work
• Checking communication with other appliances or systems
• Rebooting the VLS
• Powering down the VLS
Logging on from any system with network access
After you have configured the VLS, you can access the VLS GUI from any system that is on the same
subnet as the VLS.
Be aware of the following:
• If you log on from one system and then log on from another system, the VLS GUI automatically
logs you off from the first system.
• After an hour of inactivity, the VLS GUI automatically logs you off the system.
To log on from any system:
1. In your Web browser, type the IP address assigned to the VLS.
2. When the prompt appears, type your user name and password (the defaults are administrator
and admin) in case-sensitive format.
Figure 42 VLS GUI login window
The VLS GUI appears.
HP StorageWorks 1000i Virtual Library System 53