HP StorageWorks 1000i Virtual Library System - Manual (Page 37)

Figure 20 VLS discovery utility – main window
3. Select the VLS from the list of devices and click Configure.
The Device Configuration window opens (
Figure 21 ).
Figure 21 VLS discovery utility – Device Configuration window
4. Leave the default device name or enter a new one in the Device Name box.
5. Enter an IP address in the IP Address box.
6. Enter the subnet mask in the Subnet Mask box.
NOTE:
To display the correct subnet mask, gateway, DNS server, and domain name settings for
the VLS, open a DOS window on the computer running the VLS discovery utility and
type ipconfig /all.
HP StorageWorks 1000i Virtual Library System 37