Backplane battery, 67 tighten front top cover screws, 68 backplane battery location – HP StorageWorks 1000i Virtual Library System User Manual
Page 88: 69 removing backplane battery
Advertising
Figure 67 Tighten front top cover screws
Backplane battery
CAUTION:
Remove power to the server by disconnecting the power cord before removing or installing the backplane
battery.
Refer to
for the location of the battery on the backplane.
Figure 68 Backplane battery location
To remove the backplane battery:
1.
Remove the rear top cover (see
2.
Pull the battery retaining clip away from the battery (1).
Figure 69 Removing backplane battery
3.
Lift the battery on the lever side and pull it out of the holder (2).
To install the backplane battery:
88
Component replacement
Advertising