HP StorageWorks 1000i Virtual Library System - Manual (Page 56)

Figure 45 View/Edit Virtual Library page
IMPORTANT:
Make sure there are no currently active hosts (initiators) accessing the VL when changing settings.
The following explains each of the items:
• Available Space Indicates the amount of space that remains on the appliance.
• Used Capacity Indicates how much space on the appliance is currently consumed by the data
stored in the appliance’s virtual devices.
• Available VLSs Indicates the number of VLs that you can create (as you create a VL, this number
decreases accordingly).
• Available Virtual Cartridges Indicates the number of virtual tapes that are currently available
for use by new VLs.
• Available Virtual Drives Indicates the number of virtual tape drives that are currently available for
use by new standalone drives and VLs.
• VLS # Indicates the number automatically assigned by the VLS GUI.
• Name Indicates the Descriptive Name automatically assigned by the GUI.
• Library Configuration Accesses the Modify Target Configuration page where you can change
settings such as compression, drive count, cartridge count, and the names of targets.
• Host Configuration Accesses the Edit Host Configuration page where you can change the host
associated with the VL and add IP enforcement.
• Display Accesses the VLS Status page, which displays a device summary and a cartridge map.
• Drives Lists the number of virtual tape drives assigned to the VL.
• Cartridges Lists the number of virtual tapes assigned to the VL.
• Library To remove a VL, click Delete the VL.
• Unload Drives Click Unload Drives to mark a drive as empty. This is used in case of a power
interruption when backup applications were running. Unload Drives unloads all of the drives in
the VLS1000i.
56 Working with the VLS1000i