Allied Telesis AT-S81 - Manual (Page 174)

Chapter 14: RADIUS Authentication Protocol
174 Section I: Using the Menus Interface
a. Type C to select Shared Secret.
The following prompt is displayed:
Enter secret string for server>
b. Enter the encryption key of the RADIUS server.
6. To set the response time, do the following:
a. Type R to select Set Response Time.
The following prompt is displayed:
Enter response time>
b. Enter the amount of time in seconds the switch should wait for a
response from the RADIUS server. The range is 1 to 120 seconds.
The default is 10 seconds.
7. To configure the maximum retransmissions, do the following:
a. Type M to select Max Retransmission.
The following prompt is displayed:
Enter maximum retransmissions>
b. Enter the number of times the switch should retransmit to the
RADIUS server in the event that the server does not respond. The
range is 1 to 254. The default is 3.