Enabling or disabling the telnet server – Allied Telesis AT-S81 User Manual
Page 204
Advertising
Chapter 18: Basic Switch Parameters
204
Section II: Web Browser Interface
Enabling or Disabling the Telnet Server
To enable or disable the Telnet server, perform the following procedure:
1. From the Basic Config menu, select User Interface.
2. From the User Interface menu, select User Interface.
The User Interface page is shown in Figure 50 on page 200.
3. For the Telnet Server parameter, choose Enable or Disable from the
list.
The default is Enable. When you enable this parameter, a Telnet
connection to the switch is available.
4. Click Apply.
Advertising