Configuring 802.1x network access control – Allied Telesis AT-S81 User Manual
Page 272
Advertising
Chapter 28: 802.1x Network Access Control
272
Section II: Web Browser Interface
Configuring 802.1x Network Access Control
To configure 802.1x network access control, perform the following
procedure:
1. From the Advanced Config menu, select 802.1x.
The 802.1x Configuration page is shown in Figure 75.
Figure 75. 802.1x Configuration Page
Note
The Initialize and Re-auth Initialize parameters are described in
Steps 5 and 6, respectively.
2. To select a port, do the following:
Advertising