Allied Telesis AT-S81 - Manual (Page 290)

Chapter 32: Getting Started with the Command Line Interface
290 Section I: Basic Features
CONSOLE Sets the console configuration.
DOT1X Sets the 802.1x Port-based Network Access Control
configuration.
END Exits from the Global Configuration Command Mode
to the Privileged EXEC Command Mode.
EXIT Exits from the Global Configuration command mode
to the Privileged EXEC command mode.
HOSTNAME Sets the name of the system.
INTERFACE Changes the command mode to the Interface
Configuration command mode (you must also specify
a port).
IP Set the IP Address and IP related commands for the
system.
LOGOUT Exits the command line interface and returns to the
Main Menu.
MLS Sets the QoS feature.
MODE Displays the available modes.
NO Negates a command or sets its defaults.
PING Pings a specified IP address to check connectivity to
another system.
PRIORITY-
QUEUE Maps a CoS value to a priority value.
RADIUS-
SERVER Sets a RADIUS Server.
SNMP-
SERVER Sets the SNMP configuration in the system.
SPANNING-
TRESS Sets the STP features.
STORM-
CONTROL Sets the Broadcast Storm Control feature for the
system.
TELNET-
SERVER Sets the Telnet server.
TRUNK Add ports to a trunk group.
USERNAME Sets a system user name and password.
Table 12. Global Configuration Command Mode Commands (Continued)
Command Description