Allied Telesis AT-S81 User Manual
Page 53
Advertising
AT-S81 Management Software User’s Guide
Section I: Using the Menus Interface
53
5. Type R to select Start Reboot Process.
The following prompt is displayed:
Are you sure you want to reboot the system (Y/N)>
6. Type Y to start the reboot process.
The switch returns its operating parameters to the default values and
begins to reload the AT-S81 management software. This process
takes approximately one minute to complete. You can not manage the
device during the reboot. After the reboot is finished, you can log in
again if you want to continue to manage the device.
Advertising