Configuring the advanced rstp port settings – Allied Telesis AT-S81 User Manual
Page 266
Chapter 27: RSTP
266
Section II: Web Browser Interface
Path cost is described in “Path Costs and Port Costs” on page 139.
5. Click Apply.
6. To configure all of the ports to the same settings, in the All row,
configure one, two, or all of the following settings: STP Status, Priority,
and Path Cost. Click Apply.
Configuring the
Advanced RSTP
Port Settings
To configure the advanced RSTP port settings, perform the following
procedure:
1. From the Basic Config menu, select Rapid Spanning Tree and then
RSTP Adv. Port Config.
The RSTP Advanced Port Configuration page is shown in Figure 73.
Figure 73. RSTP Advanced Port Configuration Page
2. In the Admin/OperEdge column for the port you want to configure,
choose True or False to set whether or not the port will operate as an
edge port.