Allied Telesis AT-S81 - Manual (Page 38)

Chapter 3: Basic Switch Parameters
38 Section I: Using the Menus Interface
Setting the User Interface Configuration
This procedure explains how to adjust the user interface and security
features on the switch. With this procedure you can change various
settings that control user access to the switch.
To set the switch’s user interface configuration, perform the following
procedure:
1. From the Main Menu, type B to select Basic Switch Configuration.
The Basic Switch Configuration Menu is shown in Figure 4 on page 32.
2. From the Basic Switch Configuration Menu, type U to select User
Interface Configuration.
The User Interface Configuration Menu is shown in Figure 7.
Figure 7. User Interface Configuration Menu
The Telnet server option is described in “Disabling or Enabling the
Telnet Server” on page 43.
The web server option is described in “Disabling or Enabling the Web
Server” on page 42.
AT-8000/8POE Local Management System
Basic Switch Configuration -> User Interface Configuration Menu
Console UI Idle Timeout: 5 Min.
Telnet UI Idle Timeout: 5 min.
Telnet Server: Enabled
SNMP Agent: Enabled
Web Server: Enabled
User Name: manager
----------------------- <COMMAND> -----------------------------
Set [C]onsole UI Time Out
Enable/Disable Te[l]net Server
Set [T]elnet UI Time Out Enable/Disable [S]NMP Agent
Change Administrator User [N]ame Enable/Disable [W]eb Server
Change Administrator [P]assword [Q]uit to previous menu
[R]ADIUS Server Configuration
Command>
AT-8000/8POE Local Management System
Basic Switch Configuration -> User Interface Configuration Menu
Console UI Idle Timeout: 5 Min.
Telnet UI Idle Timeout: 5 min.
Telnet Server: Enabled
SNMP Agent: Enabled
Web Server: Enabled
User Name: manager
----------------------- <COMMAND> -----------------------------
Set [C]onsole UI Time Out
Enable/Disable Te[l]net Server
Set [T]elnet UI Time Out Enable/Disable [S]NMP Agent
Change Administrator User [N]ame Enable/Disable [W]eb Server
Change Administrator [P]assword [Q]uit to previous menu
[R]ADIUS Server Configuration
Command>