Deleting all vlans – Allied Telesis AT-S81 User Manual
Page 250
Advertising
Chapter 24: Virtual LANs
250
Section II: Web Browser Interface
Deleting All VLANs
The following procedure for deletes all VLANs, except the Default_VLAN,
on a switch. To delete selected VLANs, refer to “Deleting a VLAN” on
page 249.
To reset to the default VLAN, perform the following procedure:
1. From the Advanced Config menu, select VLAN Info.
The VLAN Information page is shown in Figure 65 on page 247.
2. Click Reset to Default.
The following prompt is displayed:
Reset VLAN configuration to default?
3. Click OK to continue or click Cancel to stop the changes.
The VLAN Information page is redisplayed with ALL VLANs, except
the default, deleted.
Advertising