Allied Telesis AT-S81 - Manual (Page 203)

AT-S81 Management Software User’s Guide
Section II: Web Browser Interface 203
Enabling or Disabling the Web Server
To enable or disable the web server, perform the following procedure:
1. From the Basic Config menu, select User Interface.
2. From the User Interface menu, select User Interface.
The User Interface page is shown in Figure 50 on page 200.
3. For the Web Server parameter, choose Enable or Disable from the
list.
The default is Enable. When you enable this parameter, an individual
can manage the switch remotely using a web browser.
Note
Disabling the web server automatically ends your remote
management session.
4. Click Apply.