Enabling or disabling the snmp agent – Allied Telesis AT-S81 User Manual
Page 224
Advertising
Chapter 20: SNMP
224
Section II: Web Browser Interface
Enabling or Disabling the SNMP Agent
To enable or disable the SNMP agent, perform the following procedure:
1. From the Basic Config menu, select User Interface.
2. From the User Interface menu, select User Interface.
The User Interface page is shown in Figure 50 on page 200.
3. For the SNMP Agent parameter, choose Enable or Disable from the
list.
The default is Enable. When you enable this parameter, SNMP access
is allowed.
4. Click Apply.
Advertising