Allied Telesis AT-S81 - Manual (Page 238)

Chapter 23: Power Over Ethernet
238 Section II: Web Browser Interface
Configuring PoE
To configure the PoE settings, perform the following procedure:
1. From the Advanced Config menu, select Power Over Ethernet.
The Power Over Ethernet Configuration page is shown in Figure 61.
Figure 61. Power Over Ethernet Configuration Page
The Power Over Ethernet Configuration page displays information
about the PoE status of each port and also allows you to configure the
port’s status and priority. The table includes the following items of
information:
Admin
The status of the port, either up or down. To change the Admin
selection, refer to “Changing the PoE Port’s Admin Setting” on
page 239.