Base station, Front, Rear – Sony LF-X11 User Manual

Page 13

Advertising

F:\M_K\SONY\5051480_LF-
X11_OI\2655608111\2655608111\2655608111_LF-X11\00GB04C00-WW.fm

masterpage: Right

LocationFreeTV

2-655-608-11(1)

Identifying Parts and Controls

Base Station

1 WIRELESS LED

Indicates the wireless function status.
Blue: Connected with the Monitor on the 5 GHz channel.
Green: Connected with the Monitor on the 2.4 GHz channel.
Turns blue or green momentarily, then turns off for 3 seconds:

Wireless communications are enabled, but wireless
communication with the Monitor is not taking place.

2 NETWORK LED

Indicates the connection status to an external network, such as the
Internet.
Green blinking: Attempting to connect.
Green: Connected to the network. The LED blinks quickly when

data is transmitted.

Off: Not connected.

3 NETAV LED

Indicates the connection status with the LocationFree device.
Green quick blinking: NetAV authentication has failed.
Green slow blinking: Attempting to connect with NetAV.
Green: Connected with NetAV.
Umber blinking: Updating dynamic DNS.
Umber: Dynamic DNS failure.
Off: Not connected.
Red: The Base Station is being initialized.

4 SETUP MODE LED

Umber: The Base Station is in Setup mode.
Umber blinking: Registration of a LocationFree device is available.

5 POWER LED (

1 page 21)

Green: The power is on.
Red blinking: A malfunction has occurred.

6 POWER button (

1 page 21)

Turns the Base Station power on and off.

7 LAN port (

1 page 19)

Connect a LAN cable (not supplied).

8 BASE STATION RESET button (