Sony LF-X11 - Manual (Page 15)

LocationFreeTV
2-655-608-11(1)
Pr
e
p
ar
at
ions
15
• The SSID, WEP key, and initial password are
on the label affixed to the side of the Base
Station. This information is needed when you
are configuring Base Station settings from a
computer, not from the Monitor, and when you
are establishing a wireless connection from a
LocationFree device to the Base Station while
in Setup mode. When using LFA-PC2, the Base
Station should be installed so that you can
easily see its side.
• The Base Station should be installed at least 10
cm from the wall.
The procedure for connecting to a TV antenna
differs depending on the type of antenna jack.
Some antenna jacks require a separate converter
or splitter (not supplied). For more information,
contact your Sony dealer.
Connecting to a set-top box
There are two different procedures for connecting
a set-top box (STB), depending on whether the
set-top box connects to the antenna cable (not
supplied) or to the video input terminal on the
Base Station.
Connecting to the antenna cable
Connecting to the video input
terminal
See “Connecting Other Devices”. ( 1 page 16)
About Base Station
Installation
Connecting to TV
Signal
Rear of Base Station
Antenna cable (not supplied)
to antenna
Rear of Base Station
Antenna cable
(not supplied)
Antenna cable
(not supplied)
Signal flow
Cable outlet
STB