Sony LF-X11 - Manual (Page 61)

F:\M_K\SONY\5051480_LF-
X11_OI\2655608111\2655608111\2655608111_LF-X11\00GB09C05-WW.fm masterpage: Right
LocationFreeTV
2-655-608-11(1)
O
th
e
r Fun
ctio
ns a
nd Se
ttings
61
Connecting via a wired LAN
After finishing the home wired LAN setup,
connect the Monitor to an Ethernet port on the
wall or on a router with a LAN cable (not
supplied).
Note
Depending on the performance of your router or hub,
when watching TV or video via wired LAN, the
Monitor may not be able to communicate correctly and
other devices connected to the Internet may be
adversely affected. When connecting by wired LAN,
be sure to use a 10/100BASE-T router or hub.
Connect the Monitor wirelessly again
The Monitor is automatically set to Wireless
Home mode whenever you disconnect the LAN
cable (not supplied).
You can adjust the backlight of the screen. This
operation changes the backlight for all screens.
1
Open the [Settings] window and select
[Backlight].
The [Backlight] window appears.
2
Adjust the backlight and select [Back].
Move the slider or select [-] or [+] to adjust
the backlight.
The [Settings] window is restored.
3
Select [Exit].
Adjusting the
Screen Backlight
Setting
item When [-] is
selected When [+] is
selected
Backlight Darker Brighter
Adjust the brightness.
[Back]