Sony LF-X11 - Manual (Page 69)

F:\M_K\SONY\5051480_LF-
X11_OI\2655608111\2655608111\2655608111_LF-X11\00GB09C05-WW.fm masterpage: Right
LocationFreeTV
2-655-608-11(1)
O
th
e
r Fun
ctio
ns a
nd Se
ttings
69
If the buttons of the on-screen remote control do
not work in the same way as the buttons on an
actual remote control, you can have the on-screen
remote control “learn” the actual remote
commands.
You can also customize the on-screen remote
control from scratch, to emulate a remote control
that does not appear in the [Make] and [Type]
lists.
1
Select [Make] and [Type], and then, select
[Learning] in the [TV] window or the [Video
Input 1 (or 2)] window.
The learning window appears.
z Tip
To customize the remote control from scratch,
select [Custom Remote] from the bottom of the
[Make] list and then select [Type] and [Learning].
2
Select a button to learn from the remote
panel shown in the window.
3
Point the remote control toward the infrared
receiver of the Monitor and press the button
you want the on-screen remote control to
learn.
Notes
• Hold the remote control about 1 to 2 inches
away from the Monitor’s learning IR receiver.
• Keep the button of your component’s remote
control pressed until the learning message
disappears.
4
The message disappears when the command
has been learned, and a frame appears
around the button.
5
Repeat steps 2 to 4 to learn all necessary
buttons.
Learning
Commands for On-
Screen Remote
[Learning]
IR receiver for Learning Remote
Continued