Sony LF-X11 User Manual
Page 39
F:\M_K\SONY\5051480_LF-
X11_OI\2655608111\2655608111\2655608111_LF-X11\00GB06C02_3-WW.fm
masterpage: Right
LocationFreeTV
2-655-608-11(1)
Usin
g Lo
cati
onFree
TV O
n
the G
o
39
For details, see “Connecting to an access point”
(
Note
The ability to connect to all public wireless
access services is not guaranteed.
z
Tip
The meanings of the icons appearing in the
Wireless Network list are as follows.
: The wireless network connected to
automatically when the Monitor starts, or
when switching from a wired to a wireless
connection in On the Go mode after the
monitor starts.
[Signal]
: A currently accessible wireless network.
[Security]
: A not user-configured wireless network
with no-encryption.
: A not user-configured wireless network
with encryption.
: A user-configured wireless network with
encryption.
: A user-configured wireless network with
no-encryption.
: A user-configured wireless network with
stealth function or a user-configured
wireless network that is unable to detect a
signal.
7
If the message “Do you want to connect this
wireless access point automatically from next
time?” appears, select [OK] or [Cancel].
If you want to connect to the wireless network
(SSID) you selected in Step 6 each time the
Monitor starts, select [OK].
z
Tip
Only one Wireless Network (SSID) can be
selected. This message does not appear if a
Wireless Network (SSID) is already selected as
“Auto connect”.
8
Check your network connection.
Wait until an icon appears at the top of the
screen to indicate that a network connection
has been successfully established.
Note
If the
icon does not appear or is flashing,
repeat Steps 4 to 8. For a wireless access point
that already has the security settings information
entered, check the [Security Settings].
Check the access point settings to be sure that
they follow the instructions of the provider.
9
Display the index window and select [Web
Lite].
If a web page that you choose appears, then
the setup is completed. Some providers
automatically display an authentication
screen when you access their public wireless
access services. Follow the instructions on
the screen and enter your ID and password.
For details, refer to the information provided
by the public wireless LAN operator.
z
Tip
If you attempt to display a web page before the
icon appears (no flash), a message appears
warning that no Internet connection is available.
If this occurs, wait until the
icon stops
flashing, and then select [Home].
Note
Some providers charge for all time you are online
– from authentication to logout. For details, refer
to the information of the network provider.
Network is not accessible.
Network connection
successful.
The
icon flashes while
an IP address is being
acquired from a DHCP
server.
The signal level indicated by
the wireless icon may also be
level one or level two
depending on signal
strength.