Sony LF-X11 - Manual (Page 29)

F:\M_K\SONY\5051480_LF-
X11_OI\2655608111\2655608111\2655608111_LF-X11\00GB06C02-WW.fm masterpage: Right
LocationFreeTV
2-655-608-11(1)
B
a
si
c
Op
er
at
io
ns
29
The following icons appear at the top of the screen to indicate the connection status of the LocationFree
TV.
Guide to On-Screen Icons
Icons
Icon Meaning
Home mode is selected for the Monitor setting.
On the Go mode is selected for the Monitor setting.
Connected to the network wirelessly.
The icon indicates the wireless signal strength in 3 stages.
This icon blinks while an IP address is being acquired from a DHCP server.
Cannot establish a wireless connection to the network because, for instance, you are
out of range or cannot perform wireless communication.
Connected to the network via a wired LAN.
This icon blinks while an IP address is being acquired from a DHCP server.
Not connected to the network via a wired LAN.
Displayed when connected to the Base Station by Wireless or Wired LAN in Home
mode.
Not connected with the Base Station in Home mode. (Interference or wireless out of
range)
The Monitor and Base Station are communicating with the NetAV function in On the
Go mode.
Other LocationFree device registered to the Base Station is connected with NetAV.
(The Monitor is communicating with the Base Station, but because LocationFree
device is connected with NetAV, TV is not available. Select the [GetAV] button to
watch TV.)
Displayed when you switch to Wide Range mode.
For details on Wide Range mode, see “Using Wide Range Mode” (
1 page 33).