Sony LF-X11 - Manual (Page 83)

F:\M_K\SONY\5051480_LF-
X11_OI\2655608111\2655608111\2655608111_LF-X11\00GB09C05-WW.fm masterpage: Right
LocationFreeTV
2-655-608-11(1)
O
th
e
r Fun
ctio
ns a
nd Se
ttings
83
You can check the capacity of the LocationFree
TV and a Memory Stick.
Notes
• The actual total memory of a Memory Stick differs
from the amount printed on it. The total memory
shown in the [Storage Size] window is the actual
amount you can use.
• A certain amount of memory on the LocationFree
TV or a Memory Stick is used for settings data that
cannot be deleted.
1
Open the [Settings] window, and then select
[Other].
The [Other] window appears.
2
Select [Storage Size].
The [Storage Size] window appears.
Check the capacity in the [Storage Size]
window.
3
Select [Back].
This returns you to the [Other] window.
4
Select [Settings], and then select [Exit].
Increasing available memory
When the amount of available memory in the unit
runs low, use the following procedures to delete
unnecessary data and free up more memory.
• Clear the cache memory. (Select [Settings] >
[Web Lite] > [Web Basics] and then select
[Erase Cache].)
• Delete mail.
• Delete pictures in the Album.
Set up according to the instructions of the public
wireless access service provider or the wired
LAN service provider.
Connecting via LAN (DHCP)
When you connect to the Internet, a DHCP server
automatically assigns an IP address, subnet mask,
and default gateway. Some DHCP servers also
assign the DNS addresses automatically.
1
Select [Settings] at the bottom right of the
window.
The [Settings] window appears.
2
Select [Monitor].
The [Monitor] window appears.
3
Select [On the Go].
The connection type changes to On the Go.
4
When using a wireless connection, select
[Settings] next to On the Go-Wireless, and
then select [Wireless Monitor Settings].
[Wireless Monitor Settings] window
appears.
Checking Storage
Size Configuring the
Monitor LAN
Connection
Manually
Continued