Sony LF-X11 - Manual (Page 25)

F:\M_K\SONY\5051480_LF-
X11_OI\2655608111\2655608111\2655608111_LF-X11\00GB05C01-WW.fm masterpage: Right
LocationFreeTV
2-655-608-11(1)
Pr
e
p
ar
at
ions
25
After completing the connections and turning on
the Base Station and Monitor, set up with [Easy
Setup (Basic)].
Use [Easy Setup (Basic)] to make basic TV,
video, network, E-mail, and clock settings. This
chapter provides a general explanation of the
items that you can set with [Easy Setup (Basic)].
• For more information about how to use [Easy
Setup (Basic)], refer to the supplied Quick Start
Guide.
• Make [Easy Setup (Basic)] settings in Home
Wireless mode.
TV
Use the [TV Setting] window to perform an
automatic channel scan with the built-in TV
tuner.
Notes
• The [Easy Setup (Basic)] automatic channel scan
cannot be used to add or delete preset channels. To
do this, select [TV/Video] in the [Settings] menu
(
1 page 67).
• If you are using an antenna cable (not supplied) to
connect an external tuner (e.g. a set-top box), you
will need to set up the TV remote control manually.
Use the [TV/Video] in the [Settings] menu to do this,
after [Easy Setup (Basic)] finishes. For details, see
“Configuring the On-Screen Remote for External
Tuners on TV” (
1 page 67).
Video
Use the [Video] window to make remote control
settings for other devices connected to the Video
terminal of the Base Station.
Notes
• See “Connecting Other Devices” ( 1 page 16) for
more information about connecting other devices.
• You cannot use [Easy Setup (Basic)] to make
Learning Remote settings. Use the [Settings] menu
if you need to make Learning Remote settings
(
1 page 69).
• See “Configuring the On-Screen Remote”
( 1 page 67) for more information about remote
control settings.
Network Connectivity
Use the [Network Connectivity] window to check
that the Base Station is connected to the network.
Notes
• You cannot use [Easy Setup (Basic)] to configure the
IP address manually. Use the [Settings] menu to
make manual settings (
1 page 71).
• The message ”IP Address configured manually.”
appears when the IP address was configured
manually. To check whether the IP address has been
configured correctly, try using the Web Lite and
Mail functions.
• This window allows you to check the connection to
a router, but you cannot check whether you are
Easy Setup (Basic)