Video – Sony LF-X11 User Manual

Page 90

Advertising

F:\M_K\SONY\5051480_LF-
X11_OI\2655608111\2655608111\2655608111_LF-X11\00GB10C06-WW.fm

masterpage: Left

LocationFreeTV

2-655-608-11(1)

Poor picture

Other

Video

Cannot get cable TV channels to appear.
Images from a connected device do not
appear.

• The unit supports cable TV channels 1 to 125. If you want to watch

other channels or the channel signal is scrambled, connect a cable box
to the video input terminal on the Base Station.

• After verifying whether [CABLE] is set to [ON], run automatic channel

scan again.

Problem

Causes and remedies

Double images or ghosts

• Connect the antenna cable (not supplied) and CATV cable securely

(

1 page 15).

• Adjust the position, orientation, and angle of the antenna.

Snow or dim pictures

• Check the antenna and/or cable connections.
• Make sure the channel selected is currently broadcasting.
• Make sure the antenna is not damaged or broken.

Stripes and noise

• Make sure the TV antenna is securely connected (

1 page 15).

• Keep the antenna cable (not supplied) away from the power cord and

other connection cables.

Problem

Causes and remedies

Cannot control external TV tuner with
the on-screen remote control.

• Some set-top boxes (STB) cannot be controlled with the on-screen

remote control when connected to the Base Station with an antenna
cable (not supplied). To control these devices with the on-screen remote
control, connect them to the Base Station with a video cable
(

1 page 16). For more details, refer to the instruction manual for your

STB.

• Connect the IR Blaster to the IR BLASTER port on the Base Station

(

1 page 13).

Problem

Causes and remedies

No picture from the connected device.

• Firmly attach the connection cables. Check that the connections to the

red, white, yellow, and S-Video jacks are correct (

1 page 16).

• Non-interlace signals from computers or other equipment cannot be