Sony LF-X11 - Manual (Page 34)

F:\M_K\SONY\5051480_LF-
X11_OI\2655608111\2655608111\2655608111_LF-X11\00GB06C02_2-WW.fm masterpage: Left
LocationFreeTV
2-655-608-11(1)
34
TV Monitor is too far, and is displayed at
the top right of the screen.
• When Wide Range Mode is selected, signal
compression rate is increased, lowering picture
quality but increasing transmission distance.
• TV and video images take a short while to display
after turning on Wide Range Mode.
• Remote control commands for TV and video have a
slower response when Wide Range Mode is
selected.
• Wide Range Mode automatically turns off when the
Monitor is switched to the Web Lite, Mail or Album
functions. If you switch back to TV/Video, you must
select Wide Range Mode again.
• Settings cannot be changed when Wide Range Mode
is selected.
If you wish to change settings, first turn off Wide
Range Mode.
The secondary audio program (SAP) mode is
available for television broadcasts that include
multiple audio tracks.
When a TV program with multiple audio tracks is
tuned in, repeatedly select [SAP] at the bottom
left of the screen to switch among audio tracks.
[SAP] can be selected when a SAP (Secondary
Audio Program) signal is received.
Each time the [SAP] button is pressed,
[STEREO] or [SAP] appears in the bar on the
screen.
z Tip
To select an SAP option for connected other device,
use the remote supplied with the connected equipment.
Selecting a
Secondary Audio
Program (SAP)