Registering locationfree devices – Sony LF-X11 User Manual
Page 77
F:\M_K\SONY\5051480_LF-
X11_OI\2655608111\2655608111\2655608111_LF-X11\00GB09C05-WW.fm
masterpage: Right
LocationFreeTV
2-655-608-11(1)
O
th
e
r Fun
ctio
ns a
nd Se
ttings
77
You can register up to 4 other LocationFree
devices (other LocationFree TV Monitors, or
computers with LFA-PC2 LocationFree Player
installed) with the Base Station. Once you
register those LocationFree devices with the Base
Station, you can use them to connect to the Base
Station and use NetAV.
z
Tip
Before registering a computer with the Base Station,
always install the supplied LocationFree Player (LFA-
PC2) on the computer. For more information about
how to register, select Windows Start > [All Programs]
([Programs] in Windows 2000) > [Sony LocationFree
Player] > [Operating Instructions], and refer to the LF-
PK1 operating instructions that appear.
Notes
• Use of the NetAV function for purposes other than
personal enjoyment is prohibited.
• It is not possible to watch TV or video on the
Monitor or registered LocationFree device at the
same time.
Put the Base Station into Setup mode. Then start
LocationFree Player on a computer located on the
same network as the Base Station, and connect to
the Base Station from the [Base Station
Selection] window. The computer will be
registered automatically.
For details, refer to the LF-PK1 Operating
Instructions.
z
Tip
To register a computer with the Base Station over the
Internet, see [Setting Up the Base Station for
Registering LocationFree TV Monitor] (below).
Before you configure the following settings, you
need to perform an Easy Setup (NetAV), and
confirm the NetAV Check result is “Success”
(
1
Open the [Settings] window, and then select
[Base Station].
The [Base Station] window appears.
2
Select [NetAV Settings].
The [NetAV Settings] window appears.
Note
[NetAV Settings] can be selected when the
Monitor is in Home mode.
3
Select [Device Registration].
The [Device Registration] window appears.
4
Set the items in the window.
Registering
LocationFree
Devices
Setting Up the Base Station
for Registering LocationFree
Player (LFA-PC2)
Base
Station
Monitor
Internet
Computer with
LocationFree
Player installed
Monitor
Register
Setting up the Base Station
for Registering LocationFree
TV Monitor
Continued