Sony LF-X11 - Manual (Page 63)

F:\M_K\SONY\5051480_LF-
X11_OI\2655608111\2655608111\2655608111_LF-X11\00GB09C05-WW.fm masterpage: Right
LocationFreeTV
2-655-608-11(1)
O
th
e
r Fun
ctio
ns a
nd Se
ttings
63
At the time of purchase, the LocationFree TV is
set up to select the best channel automatically,
either 2.4 GHz or 5 GHz.
When the wireless communication signal
becomes unstable during wireless operation, the
LocationFree TV automatically shifts to the
clearest wireless channel. In the following
situations, however, you should change the
wireless channel manually:
• TV pictures are frequently interrupted.
• You want to set the optimum wireless channel
manually.
• Another wireless device using the same
frequency is located near the unit.
• You want to connect a computer to the Base
Station as a wireless access point.
Notes
• While configuring the wireless channel, do not turn
off the Base Station or Monitor.
• While configuring the wireless channel, place the
Monitor next to the Base Station.
z Tip
You can check the wireless networks in use near the
LocationFree TV in the [Public Wireless Access]
window (
1 page 40). When your wireless LAN
reception is poor, check whether there is another
wireless network nearby that is using the same
channel.
1
Open the [Settings] window and select
[Home Wireless].
The [Home Wireless (Wireless Channel)]
window appears.
2
Adjust the necessary items.
1 Select [Manual].
2 Select a wireless channel.
3 Select [Set].
4 Check the wireless signal quality.
If it is poor, change the wireless channel
again to find a better channel.
Note
The channels in the 5150-5250 MHz frequency
band (the channels are 36, 40, 44, 48) are limited
by the FCC, Industry Canada and some other
countries to indoor use only. Do not use these
channels outdoors. Set the channel manually to
the another channel or [Automatic: 2.4 GHz only]
when using outdoors.
3
Make sure you can watch TV or video
through the wireless channel you have
selected and then select [Back].
The [Settings] window is restored.
4
Select [Exit].
z Tip
The LocationFree TV uses the 2.4 GHz and 5 GHz
channels. If you select [Automatic: 2.4GHz & 5GHz],
[Automatic: 2.4 GHz only] or [Automatic: 5 GHz
only], the Base Station automatically selects the
optimum wireless signal for the specified band.
Changing the
Wireless Channel
Manually (Home
Wireless)