8 care and maintenance, 8care and maintenance – Festo Линейные модули HMP User Manual
Page 46
HMP−...−B−...
Festo HMP−...−B−... 0408NH English
46
8
Care and maintenance
Cleaning
S
If necessary, clean the exterior of the linear module type HMP−...−B with a soft
cloth.
The following cleaning agents are permitted:
ć soap suds (max. 60 °C)
ć petroleum ether
ć all non−abrasive cleaning agents.
S
Grease the following parts of linear module type HMP−... in accordance with
the table:
The ungreased surfaces of
the guide tube
The roller bearing of the
guide tube
Component
Lubricating
interval
If required
After every 5000 km run
(at the latest every 3 years)
Lubricating point
Guide tube
Lubricating nipple
aD
*)
Lubricating
sequence
Move the guide tube backwards and forwards by hand during the
lubricating process (the cavities will then be filled with oil to an
equal extent).
Lubricating
grease
LUB−KB2 (Klüberplex−BE31−222)
LUB−KC1 (Centoplex−2−EP)
*) For needle−pin nozzle as per DIN 1283
Fig. 36