Festo Линейные модули HMP - Manual (Page 48)

HMP−...−B−...
Festo HMP−...−B−... 0408NH English
48
6. Turn the elements as follows:
ć Unscrew completely the adjusting
sleeve with the shock absorber.
ć Unscrew the shock absorber from the
adjusting sleeve.
ć Screw in the new shock absorber from
the repair set.
ć Screw in the adjusting sleeve with the
shock absorber up to the marking.
7. Tighten the locking screws again.
HMP−... 16 20/25 32
Nm 2.9 5.9
Fig. 41
8. Tighten the locking nut of the shock
absorber again.
The tightening torque is:
HMP−... 16 20/25 32
Nm 5 20 35
Fig. 43
9. Fasten the housing cover again.
10. Complete re−commissioning of the HMP−...−B in accordance with the chapter
Commissioning.
S Make sure that the linear module HMP−...−B is overhauled only by our repair
service.
Fig. 39
Fig. 40
Fig. 42