Festo Линейные модули HMP - Manual (Page 52)

HMP−...−B−...
Festo HMP−...−B−... 0408NH English
52
32−...−B 25−...−B 20−...−B 16−...−B
Permitted cushioning energy
with shock absorber
typeĂYSRW−... 4 Nm 12 Nm 12 Nm 35 Nm
Permitted speed of the guide
tube min. 0.05 ...
max. 0.8 m/s min. 0.05 ... max. 1.1 m/s
Permitted electrical
conductor cross−section 0.08 ... max. 0.5 mm 2 / AWG 28−20
(only with HMP...−EL)
Length of insulation removed 5 ... 6 mm (only with HMP−...−EL)
Minimum permitted bending
radius for protective cable
tube (static), only with
HMP−...−AD/EL MKR−...−PG−21 > 45 mm
MKR−...−PG−29 > 50 mm
MKG−20−PG−21 > 130 mm
MKG−23−PG−29 > 155 mm
MKG−37−PG−29 > 205 mm
Protection class IP40
Materials Cylinder profile, front plate,
end cover, bearing cover,
shock absorber retainer:
Aluminium, anodized
Guide tube, cylinder barrel,
outer tube, stops,
Sheet metal angle:
St
End module: PA
Viewing window: PC
Cylinder seals, dirt wiper: PUR
O−rings, seals: NBR
Adhesives: Loctite 242 and 649
Weight (theoretical)
stroke = 0 mm
per 10 mm stroke 2.1 kg
0.08 kg 4.7 kg
0.11 kg 6.3 kg
0.15 kg 10.9 kg
0.20 kg
*) During 100 consecutive strokes under constant operating conditions
Fig. 46