Festo Линейные модули HMP - Manual (Page 51)

HMP−...−B−...
Festo HMP−...−B−... 0408NH English
51
Fault Remedy Possible cause
Linear module
does not
achieve the Missing air volume Enlarge connection cross−section
Switch volume upstream
achieve the
desired speed
Heavy friction or counterforce Select larger linear module
Fig. 45
12 Technical data
Type HMP−...
16−...−B 20−...−B 25−...−B 32−...−B
Design Double−acting pneumatic cylinder
Mounting position As desired
Medium Filtered, lubricated or non−lubricated compressed air
(filter fineness min. 40 Ģm)
Ĉ at speeds up to max. 1 m/s (lubricated compressed
air permitted)
Ĉ at speeds over 1 m/s (always use lubricated comĆ
pressed air)
Operating pressure range 4 ... max. 8 bar
Connector thread M5 G1/8 G1/8 G1/4
Permitted temperature range 0 °C ... max. 60 °C
Theoretical stroke force at
6Ăbar
Ĉ running forwards
Ĉ running backwards
121 N
104 N 188 N
158 N 295 N
247 N 483 N
415 N
Leakage 2 Nl/h (when new, measured at 6 bar)
Repetition accuracy *) < 0.01 mm
End position cushioning Hydraulic cushioning
Cushioning length 14 mm 20 mm 20 mm 26 mm