Weighing parametres setting, Weighing server program starting, Eighing server program starting – RADWAG TMX 6/15/H2 Multifunctional Scales User Manual
Page 102
Advertising
29. WEIGHING PARAMETRES SETTING
User can change basic weighing setting using Weighing Server program.
29.1. Weighing Server program starting
Start scale software as instructed in point 27.1 or proceeding as follows:
• Press
the
START button on the bottom taskbar,
• press
Programs,
• press
RADWAG,
• press
Weighing Server, click it
Window program Weighing Server will be open:
- 102 -
Advertising
This manual is related to the following products: