RADWAG TMX 6/15/H2 Multifunctional Scales - Manual (Page 15)

Notice:
Zeroing is possible only within the range of ±2% of maximum scale’s
capacity. If the zero value is beyond this range, Err2 message will be
displayed.
10.4. Weighing on two range scales
Switching between the I range and the II range weighing appears
automatically without operator’s presence when I range maximum value is
exceeded. Starting II range weighing is indicated by
symbol in the top
left corner of the scale window. When loading is eliminated the indication
returns to zero value. Until then the scale remains in the II range.
Switching between the II range and the I range takes place automatically
after loading elimination, when the indication returns to AUTOZERO
range
and symbol appears. Then II range symbol disappears and weighing
is performed again with the accuracy of the I range.
11. WINDOW NAVIGATION
MAIN PROGRAM’S WINDOW DESCRIPTION
- 15 -
1
6
2
7
3
4
8
5